Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BGP route announcement

We are currently planning out a site redundancy for the company, and customers vpn to a single ip address. The second site is at a separate geographical location. ISP1 is the same between the two sites and ISP2 is the second connection at site 1 and ISP3 is the second at site 2.

Currently we have a full /24 public address.  Can I subnet the /24 into 3 parts and take one of the parts and advertise the same address from the same AS# from two different locations.

Current x.x.x.255 /24

Want to advertise:

x.x.x.0/224          from both site 1 and site 2

x.x.x.32/224       from site 1

x.x.x.64/224       from site 2

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: BGP route announcement

Yes, you can.

You need to make sure those subnets are part of the routing table while they are being advertised into BGP.

You could do so by using static routes to null0.

Regards,

Edison.

1 REPLY
Hall of Fame Super Bronze

Re: BGP route announcement

Yes, you can.

You need to make sure those subnets are part of the routing table while they are being advertised into BGP.

You could do so by using static routes to null0.

Regards,

Edison.

152
Views
0
Helpful
1
Replies
CreatePlease to create content