Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

BGP route filtering

How to stop isp1 routes advertisement via isp2 on Bgp... The problem is when my spoke isp1 mpls down... Still it is getting routes via isp2
Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

I do not have an

I do not have an understanding of your topology or of the relationship between ISP 1 and ISP 2 and therefore can not be sure how well my suggestion will work. But here is what I frequently use when I want to be sure that routes learned from ISP 1 do not get advertised to ISP 2.

ip as-path access-list 10 permit ^$

router bgp 123

 neighbor 1.2.3.4 filter-list 10 out

 

HTH

 

Rick

5 REPLIES
Cisco Employee

Hi,To assist you better, can

Hi,

To assist you better, can you come a bit clear about the issue and the topology?

Thanks,

Lal

New Member

In General , if u share the

In General , if u share the best routing filter to isolate ISP1 and ISP2 it will be helpfull

because it needs multiple scenario where one link and multiple links at spoke side.

 

The problem is ISP1 is in mesh topology , so when the ISP1 is down it is showing alternate route via ISP2 .. we need to avoid the same.

 

 

New Member

i heard some distribution

i heard some distribution list to do the same .. kindly help me on this ...

Hall of Fame Super Silver

I do not have an

I do not have an understanding of your topology or of the relationship between ISP 1 and ISP 2 and therefore can not be sure how well my suggestion will work. But here is what I frequently use when I want to be sure that routes learned from ISP 1 do not get advertised to ISP 2.

ip as-path access-list 10 permit ^$

router bgp 123

 neighbor 1.2.3.4 filter-list 10 out

 

HTH

 

Rick

New Member

thanks 

thanks

 

71
Views
5
Helpful
5
Replies