this is an excerpt from the APNIC registration regulations:
According to the APNIC address space management policy, it is not mandatory for you to register a route object. However, from a network operation point of view, you may be required to register a route object with APNIC. Some ISPs and network operators use route object information in the Internet Routing Registry database to:
Debug routing problems
Automatically configure backbone routers
Perform network planning
We suggest you discuss the requirement of registering route objects with your ISP.
My guess is that SingTel will want the registration, you need to check with them to be sure.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...