Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

BGP supported on 3550 platforms?

Hi All,

Can you please let me know if I can configure BGP on a Cisco 3550 switch (WS-C3550-48). It is currently running Version 12.2(44)SE1.

If not, what would be the recommended version in that device?

Appreciate your response.

Cheers

Navneet

1 ACCEPTED SOLUTION

Accepted Solutions

Re: BGP supported on 3550 platforms?

Hi,

Cisco Catalyst WS-C3550-48 with 12.2(44)SE1 IP SERVICES IOS (W/ or W/O ENCRYPTION) can run BGP.

BGP is NOT available in IP BASE.

However, it depends on how you position this device. Do take note that to received full internet BGP route (approximately 200K++ prefixes), you need minimum of 512MB RAM.

Dandy

5 REPLIES

Re: BGP supported on 3550 platforms?

BGP is supported with the IP Services IOS 12.2(44)

New Member

Re: BGP supported on 3550 platforms?

Hi Collin,

Thanks for your reply. Can you please let me know where we can find the list of protocols which are supported for a particular IOS release?

Cheers

Navneet

Re: BGP supported on 3550 platforms?

You can check either the Feature Navigator-

http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

or the Software Advisor-

http://tools.cisco.com/Support/Fusion/FusionHome.do

Both require a CCO login.

New Member

Re: BGP supported on 3550 platforms?

Thanks for the clarification.

Cheers

Navneet

Re: BGP supported on 3550 platforms?

Hi,

Cisco Catalyst WS-C3550-48 with 12.2(44)SE1 IP SERVICES IOS (W/ or W/O ENCRYPTION) can run BGP.

BGP is NOT available in IP BASE.

However, it depends on how you position this device. Do take note that to received full internet BGP route (approximately 200K++ prefixes), you need minimum of 512MB RAM.

Dandy

536
Views
5
Helpful
5
Replies
CreatePlease to create content