I have two Catalyst 6500 running BGP between VRF instances. I have IOS 12.2(33)SXH3 on both devices.
Everythings works well, prefixes are exchanged as designed. The only problem I have is that I don't find the right command to see the BGP TCP session state between both Catalyst. The command "show ip bgp summary" does not display anything between devices becaus I don't use the global plane. So, how can I see the same information for each VRF ?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...