Did you have the VIC-2FXO module installed in the 1751-V ? It can provide the connectivity to connect to the PSTN (direct line) directly. If it is not direct line, you should check the compatibility of the voice module and your phone system.
I believe the SNMP can log something but it may not able to log the exact info. that you want. And you may also need to interpert or filter out the unwanted info. Try to use some SNMP manager to poll the router and try.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...