03-22-2008 12:58 PM - edited 03-03-2019 09:14 PM
Hi Team,
I am facing a problem i.e. my requirement is to bind the 2 IP addresses (i.e.10.15.173.10 & 10.15.173.11 w.r.t. their Mac -Address) moreover, both IP addresses belong to the one server and also it not comes under the excluding range. But the problem is that both 2 IP addresses have been already assigned automatically in the N/W by the DHCP server configured by our L3 device. Once I was binding these IP addresses w.r.t. their Mac-address it showing me this âIP addresses has already assignedâ in the N/W.Please tell me the how can I bind both IP addresses w.r.t. their Mac-address statically.
03-22-2008 03:57 PM
What is that "L3 device", and what device tells you "IP address already configured" ?
03-22-2008 04:02 PM
The L3 device is Cisco-4506.We have configured this L3 devices as a DHCP server for the N/W.
03-22-2008 04:36 PM
You cannot have two dhcp server bindings for the same mac. What you can do, bind the second IP to a mac address of fantasy, dhcp server will never assign it, but the server can use it anyway and it will work.
Hope this helps, please rate post if it does!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide