Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bonded ADSL - Lots of CRC and header errors

Hi All

Getting intermittent failures using a 1760 router with 2 adsl wics.

Looks to me line like one of the lines has a noise problem? Perhaps someone could confirm this for me?

sh dsl int atm 0/0

ATM0/0

Alcatel 20150 chipset information

ATU-R (DS) ATU-C (US)

Modem Status: Showtime (DMTDSL_SHOWTIME)

DSL Mode: ITU G.992.1 (G.DMT) Annex A

ITU STD NUM: 0x01 0x1

Vendor ID: 'ALCB' 'TSTC'

Vendor Specific: 0x0000 0x0000

Vendor Country: 0x00 0xB5

Capacity Used: 34% 93%

Noise Margin: 11.5 dB 5.0 dB

Output Power: 20.0 dBm 10.5 dBm

Attenuation: 62.0 dB 30.5 dB

Defect Status: None None

Last Fail Code: Handshake or init message invalid or had bad CRC

Selftest Result: 0x00

Subfunction: 0x15

Interrupts: 1370 (0 spurious)

PHY Access Err: 0

Activations: 6

LED Status: ON

LED On Time: 100

LED Off Time: 100

Init FW: embedded

Operation FW: embedded

SW Version: 3.8131

FW Version: 0x1A04

Interleave Fast Interleave Fast

Speed (kbps): 0 576 0 160

Cells: 0 3378 0 593597

Reed-Solomon EC: 0 0 28 31

CRC Errors: 0 2394 27 2183

Header Errors: 0 1235 39 517

Bit Errors: 0 0

BER Valid sec: 0 0

BER Invalid sec: 0 0

and ADSL 1/0

router#show dsl int atm 1/0

ATM1/0

Alcatel 20150 chipset information

ATU-R (DS) ATU-C (US)

Modem Status: Showtime (DMTDSL_SHOWTIME)

DSL Mode: ITU G.992.1 (G.DMT) Annex A

ITU STD NUM: 0x01 0x1

Vendor ID: 'ALCB' 'TSTC'

Vendor Specific: 0x0000 0x0000

Vendor Country: 0x00 0xB5

Capacity Used: 99% 61%

Noise Margin: 4.0 dB 21.0 dB

Output Power: 20.0 dBm 12.0 dBm

Attenuation: 20.0 dB 10.0 dB

Defect Status: None None

Last Fail Code: None

Selftest Result: 0x00

Subfunction: 0x15

Interrupts: 2658 (0 spurious)

PHY Access Err: 0

Activations: 2

LED Status: ON

LED On Time: 100

LED Off Time: 100

Init FW: embedded

Operation FW: embedded

SW Version: 3.8131

FW Version: 0x1A04

Interleave Fast Interleave Fast

Speed (kbps): 6848 0 448 0

Cells: 50919 0 2505436 0

Reed-Solomon EC: 346 0 0 0

CRC Errors: 4 0 0 0

Header Errors: 3 0 0 0

Bit Errors: 0 0

BER Valid sec: 0 0

BER Invalid sec: 0 0

Any ideas? Perhaps a filter problem?

Any help would be appreciated.

Anthony

493
Views
0
Helpful
0
Replies