Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

BPDU on Switchport

Hi,

Host is generating BPDU on the Switch port. Please help when host can generate BPDU and what is the Standard Solution??

%SPANTREE-2-BLOCK_BPDUGUARD: Received BPDU on port FastEthernet2/0/18 with BPDU Guard enabled

  • WAN Routing and Switching
2 REPLIES
Hall of Fame Super Gold

Re: BPDU on Switchport

Are you sure port FastEthernet2/0/18 does not have a switch on the far end?

You can disable (at your own peril) BPDU Guard by doing the following commands:

interface FastEthernet2/0/18

no spanning-tree bpduguard enable

Hall of Fame Super Silver

Re: BPDU on Switchport

Hello Rupesh,

if the host is bridging between two NICs your switch can listen to the BPDUs received on the other host NIC port.

So be careful and investigate on what is the host doing

Hope to help

Giuseppe

256
Views
0
Helpful
2
Replies
This widget could not be displayed.