Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BPX - 8600

Hello..

Trunk OF card BXM-622 OC-12 dont pass through of data.

Detail: Stats trunk is Active

BPCTIA01 VT Service BPX 8620 9.2.43 Nov. 6 2008 17:56 G-03

TRK Type Current Line Alarm Status Other End

1.1 OC12 Clear - OK BPCTIB01/1.1

9.1 OC12 Clear - OK BPCTIB01/9.1

2 REPLIES
Silver

Re: BPX - 8600

If it seems to the problem on trunk. Try to reset this trunk at both ends. Else I think the issue here is the longer route seems to be the best route from the BPX perspective coz when a preferred route is configured on the shorter route, it works

pretty well but when a connection is created normally, the network chooses the longer route to build it. Maybe the Routing algorithm is mixed up here....

New Member

Re: BPX - 8600

Hello...

Interconnected via card OC-12 in both.

I have some interfaces OC-3 interconnected in such a way, however OC12- not.

you know some difference between configuration of CARDs OC12 for OC-3 ?

this can be the problem !!

my team it knows very of Cards OC3, however OC12- not.

thanks !!

176
Views
0
Helpful
2
Replies
CreatePlease to create content