I'm having a problem trying to break a subnet ips valid embratel passed by on a home Router cisco 2800 series. I have the following topology as can be seen in attached picture. So that when I try to create the route for the subnet that are behind the firewall pointing to my server with the following command ip route 126.96.36.199 0.0.0.7 188.8.131.52 the home Router returns me the following error:
inetsafe (config) # ip route 184.108.40.206 0.0.0.7 220.127.116.11 % Inconsistent address and mask inetsafe (config) #
In this scenario I created everything happened just in time to add the route to network as the friend above said swapped the wildcard mask for the masks and worked comun blz but put in my real situation with my real ips not working. Router reorna with message% Inconsistent address and mask after trying to add route to network remembering that I have a xxxx/28 transferred by my ISP. He broke into the home Router mainline xxxx/30 and then created the xxxx/29 network behind the firewall to pass the ips valid for customers ..
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...