Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Bridge DSL to Cisco 881 dialer problem

I have thomson DSL modem which i Configured as bridge mode and do pasted configuration on cisco 881;

 

interface FastEthernet4
bandwidth inherit
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
hold-queue 224 in
!

interface Dialer0
ip address negotiated
ip verify unicast reverse-path
no ip redirects
no ip unreachables
ip directed-broadcast
no ip proxy-arp
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1400
load-interval 30
dialer pool 1
dialer-group 1
ppp authentication chap callin
ppp chap hostname
ppp chap password

 

..Please help me what is the problem in this Case;Framed IP from ISP is 212.76.32.XX and Framed-Route is 212.76.65.XX/30

 

Cheers

 

1 REPLY

Hello. Per my understanding

Hello.

 

Per my understanding you need only following commands:
interface Dialer0
 ip address negotiated
 no ip unreachables
 ip nat outside
 ip virtual-reassembly
 encapsulation ppp
 ip tcp adjust-mss 1400
 load-interval 30
 dialer pool 1
 dialer persist
 ppp chap hostname
 ppp chap password

Surely you need correct login/password.

If it doesn't work, please collect debug by "debug pppoe events" and "debug ppp nego".

330
Views
0
Helpful
1
Replies
CreatePlease to create content