10-04-2009 10:41 AM - edited 03-04-2019 06:15 AM
Hello,
I am trying to bridge over multilink T1s to another router. It works fine except I need to route other traffic over the T1s too. Using the following interface setting seems to get the IP overridden by the BVI's.
interface Multilink 1
ip add 10.x.x.x
bridge-group 1
interface BVI1
ip address 2.2.2.3 255.255.255.0
Any ideas would be appreciated.
Regards
10-04-2009 10:52 AM
Hello Mik,
if you need to use the link to route IP traffic you should look at L2TPv3
http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html
this is supported on ISR 2811 or above
Hope to help
Giuseppe
10-04-2009 11:50 AM
Giuseppe,
It looks like that will work perfectly for me. Thanks for the help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide