Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bridging over an IP/MPLS network

I have a customer that has recently migrated their WAN from Frame Relay to MPLS. They have some old HP DTCs that require you to bridge the traffic as it is not routeable. Not a problem with Frame Relay, but we cannot do this with IP/MPLS. Has anyone seen this issue?

Thanks,

Jack

1 REPLY
Cisco Employee

Re: Bridging over an IP/MPLS network

Hello Jack,

Have you looked at EoMPLS. Below is the URL that has some information on this.

http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.2_25_seg_seg1/configuration/guide/swmpls.html#wp1021749

I hope it helps.

Regards,

Arul

255
Views
0
Helpful
1
Replies