Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Buffer issue 1800 series router

%EM_FPGA-1-FPGA_RING_FULL: FPGA buffer descripter is full..... Hi I am continuously getting the above error log in cisco router. What could be the possible issue? any idea? I tried with output interpretur but not so effective...

4 REPLIES

Re: Buffer issue 1800 series router

Hi Prasad, I was precisely reading on this today, not exactly on the system error you are getting but rather "input error " on interface stats, read this link which will give you a better picture of router buffers and how it is used in addition to tuning up system buffers, take a look at your routers interfaces "input errors" , this link will help you understand it better.

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a7b80.shtml

Rate any helpfull post

Rgds

Jorge

Re: Buffer issue 1800 series router

Prasad, my appologies , I may have spoken to soon.. I did a search for this error message fruther along with what entails %EM_FPGA error codes and seems to be related with encryption or along those lines, I suggest if you have smarnet to open up TAC case as there is not much information provided in more depth.

http://www.cisco.com/en/US/products/ps6350/products_system_message_guide_chapter09186a0080462678.html#wp518289

Rgds

Jorge

New Member

Re: Buffer issue 1800 series router

Hi,

Thanks for the update. The small session mentioned in the Above link is the message you will get from output interpreter. SO i think its time for TAC... Thank u so much for providing the updates

Re: Buffer issue 1800 series router

You're welcome, let us know the outcome with TAC.

997
Views
4
Helpful
4
Replies