Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Bug CSCdm64510

Are the any fixes for this bug? Pls advise the description of it if possible. Cisco does give me an empty errored page when I request the description.

thanks

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Re: Bug CSCdm64510

Not at all. That bug is specific to the AIP. Therefore, it does not apply to the OC3 module on the 3800 platform.

Hope that helps - pls rate the post if it does.

Paresh

3 REPLIES
Purple

Re: Bug CSCdm64510

Unfortunately, it seems that the bug has been closed off without a resolution. Therefore, configuring PCR=SCR on the AIP will result in the PVC being treated as a UBR PVC. The one workaround you have is to configure the SCR to be the highest allowed SCR that is less than the required PCR...

Paresh

New Member

Re: Bug CSCdm64510

Hello Pareh,

Thanks for that. Does this apply to new Cisco 3800 routers with OC3 module that support traffic shaping?

Thanks

Purple

Re: Bug CSCdm64510

Not at all. That bug is specific to the AIP. Therefore, it does not apply to the OC3 module on the 3800 platform.

Hope that helps - pls rate the post if it does.

Paresh

90
Views
0
Helpful
3
Replies