Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Bundling of E1 links with Subinterface and Nat configuration for internet

Hi,

I have a case for a customer where dual serial interface are connected to same router at CE and PE end.

Requirement is to bundle both the Serial links using Multilink feature to be able to support active/active configuration for high availability.

Going forward we want to enable internet on the same last mile, as I understand using same last mile for both internet and MPLS will require two things on the router:

1) Creation of Subinterface on serial interface (Requires the encapsulation to be changed to Frame Relay)

2) NAT support on the Subinterface for internet traffic

To summarize the requirement we need Multilink feature with option of running internet and MPLS service on the Multilink group using subinterface and NAT configuration.

Rgds

1 REPLY
Hall of Fame Super Gold

Re: Bundling of E1 links with Subinterface and Nat configuration

Hi,

you do not need frame-relay an subinterfaces.

Ask SP to configure MLPPP and get it tested.

Then router will be configured so that for MPLS routes it will do no NAT, but it will do NAT for the internet destinations.

153
Views
4
Helpful
1
Replies
CreatePlease to create content