02-12-2008 09:17 AM - edited 03-03-2019 08:40 PM
Hey guys, I have a 3825 router as a gateway for a ccm4.1. I just realized the router is at 12.4 3g. Does anyone have any advice on the newest release I should go? The gateway has 3 PRI's.
Thanks in adavance.
Donnie
02-12-2008 09:19 AM
Hi, what you have is fine, 3j is out but unless you run into any bug, I would not change.
There there are the T and other releases that you probably don't need.
02-12-2008 09:42 AM
ok thanks. The problem I am having is that the ccm-manager config will not download.
Im getting these errors-
*Feb 12 17:47:35.872: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/network-confg) failed
*Feb 12 17:47:56.884: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/cisconet.cfg) failed
*Feb 12 17:48:17.240: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/uei_4848_mpls_3825-confg) fail
*Feb 12 17:48:38.248: %SYS-4-CONFIG_RESOLVE_FAILURE: System config parse from (tftp://255.255.255.255/uei_4848.cfg) failed
02-12-2008 10:04 AM
I fixed it, the sybscriber tftp server needed resetting.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: