Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

C3925 %ENVMON-1-CPU_CORE_WARNING_OVERTEMP

Hi all,

 

Do you know what the meaning is or how to fix it ?, thank you

 

Model : 3925

 

Mar 10 21:58:49.582 UTC: %ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 18. It exceeds threshold 22. Please resolve system cooling immediately to prevent system damage.
Mar 10 21:59:19.641 UTC: %ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 18. It exceeds threshold 22. Please resolve system cooling immediately to prevent system damage.
Mar 10 21:59:49.700 UTC: %ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 18. It exceeds threshold 22. Please resolve system cooling immediately to prevent system damage.
Mar 10 22:00:19.759 UTC: %ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 18. It exceeds threshold 22. Please resolve system cooling immediately to prevent system damage.

 

 

------------------ show environment ------------------


SYSTEM POWER SUPPLY STATUS
==========================
Internal Power Supply 1 Type: AC
Internal Power Supply 1 12V Output Status: Normal

Internal Power Supply 2 Type: Absent

SYSTEM FAN STATUS
=================
Fan 1 OK, Medium speed setting
Fan 2 OK, Medium speed setting
Fan 3 OK, Medium speed setting
Fan 4 OK, Medium speed setting
Fan 5 OK, Medium speed setting

SYSTEM TEMPERATURE STATUS
=========================
Intake Left temperature: 31 Celsius, Normal
Intake Right temperature: 26 Celsius, Normal
Exhaust Right temperature: 44 Celsius, Normal
Exhaust Left temperature: 53 Celsius, Normal
CPU temperature: 28 Celsius, Normal
Power Supply Unit 1 temperature: 31 Celsius, Normal

REAL TIME CLOCK BATTERY STATUS
==============================
Battery OK (checked at power up)

CPU CORE TEMPERATURE STATUS
===========================
  CPU Core current reading, target = 22, reading = 18 (+4): Over-Target
  CPU Core out of target history in past 415672.0 mins:
     Consecutive out-of-range mins high water mark: 15727.0
     Total minutes out-of-range: 25444.5
     Last 5 minutes out-of-range: 5.0
     Last 5 minutes consecutive out-of-range: 15727.0
     Last 5 minutes read failure count: 0


SYSTEM WATTAGE
===============
Motherboard, EHWIC, PVDM, Power Supply and Fan Power consumption = 127.2 W
Total System Power consumption is: 127.2 W

Environmental information last updated 00:00:15 ago

 

 

 

Regards
Leung Che Man

9 REPLIES
Hall of Fame Super Gold

Could be an IOS bug. Go to

Could be an IOS bug. Go to the Cisco Bug Toolkit and punch in your IOS version and see if the error message you're seeing appears.

Thanks for your information

Thanks for your information but I cannot find any ios bug related to this error message. Could I know whether the threshold value can be change ? I can see the threshold is only 22. Is it a default value ?

 

Cheers

Leung Che Man

New Member

Hi all, Could anyone know

Hi all,

 

Could anyone know what the issue is ? I can see system temperature and system FAN are normal

 

Mar 10 21:58:49.582 UTC: %ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 18. It exceeds threshold 22. Please resolve system cooling immediately to prevent system damage

 

 

Cheers

Leung che Man

Hall of Fame Super Gold

Post the output to the

Post the output to the command "sh env temp" and "sh env all".

Cisco Employee

Part of this question is the

Part of this question is the following log message:

%ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 18. It exceeds threshold 22. Please resolve system cooling immediately to prevent system damage.

There is a real problem being reported here. When the 3900e was developed they used an inverted value for the temperature which CSCum99304 should eventually address. To find the true temperature you take the max value of 101 and subtract from there. So in the example message the current real value is 83C and the threshold is 79C. In other words the CPU is really outside of the normal range. As the current value goes down the problem is actually getting worse. For example the person who had the log message with a current value of 10 equates to 91C.

 

New Member

Hi,  Even I have the same

Hi, 

 

Even I have the same message coming up and one more warning message comes up (modem signal transitons)

 

 

%HWIC_SERIAL-3-LINEFLAP: Excessive modem signal transitions detected on line 5

%ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 10. It exceeds threshold 20. Please resolve system cooling immediately to prevent system damage

 

What could be the issue ?

 

 

Chinar

New Member

I'm getting this same issue,

I'm getting this same issue, did anyone find an answer?

Oct 16 09:45:55.339: %ENVMON-1-CPU_CORE_WARNING_OVERTEMP: Warning: CPU core is very hot value = 24. It exceeds threshold 24. Please resolve system cooling immediately to prevent system damage. 

#sh env all
SYSTEM POWER SUPPLY STATUS
==========================
 Internal Power Supply 1 Type: AC
 Internal Power Supply 1 12V Output Status: Normal

 Internal Power Supply 2 Type: Absent

SYSTEM FAN STATUS
=================
 Fan 1 OK, Low speed setting
 Fan 2 OK, Low speed setting
 Fan 3 OK, Low speed setting
 Fan 4 OK, Low speed setting
 Fan 5 OK, Low speed setting

SYSTEM TEMPERATURE STATUS
=========================
 Intake Left temperature: 22 Celsius, Normal
 Intake Right temperature: 18 Celsius, Normal
 Exhaust Right temperature: 41 Celsius, Normal
 Exhaust Left temperature: 46 Celsius, Normal
 CPU temperature: 20 Celsius, Normal
 Power Supply Unit 1 temperature: 29 Celsius, Normal

REAL TIME CLOCK BATTERY STATUS
==============================
 Battery OK (checked at power up)

CPU CORE TEMPERATURE STATUS
===========================
  CPU Core current reading, target = 24, reading = 29 : Normal
  CPU Core out of target history in past 248.0 mins:
     Consecutive out-of-range mins high water mark: 26.0
     Total minutes out-of-range: 43.0
     Last 5 minutes out-of-range: 0.0
     Last 5 minutes consecutive out-of-range: 0.0
     Last 5 minutes read failure count: 0


SYSTEM WATTAGE
===============
 Motherboard, EHWIC, PVDM, Power Supply and Fan Power consumption = 133.2 W
 NM/SM slot 1 Power consumption = 35.904 W
 Total System Power consumption is: 169.1 W

 Environmental information last updated 00:00:19 ago


System image file is "flash0:c3900e-universalk9-mz.SPA.151-4.M5.bin"

 

 

New Member

Actually thinking about this

Actually thinking about this there's no way the CPU can be at a similar temperature as the intake air.....

New Member

It looks like it's faulty fan

It looks like it's faulty fan assembly with 3925 chassis.
Has anyone tried replacing FAN assembly of 3925-Terminal Server?

3492
Views
0
Helpful
9
Replies