Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Fabric channel errors)

HI,

For an activity on the client's last night.

we install a card WS-X6704-10GE in slot 3 in cisco 7600S.. when installing the card into the router showed us the following error:

%C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Fabric channel errors)

The slot 3 works well. The failure occurs in slot 4 does not participate in the activity. That's the weird thing.

Also install another card in the slot 4, on a trial basis. and continued with the same problem.

Thanks for support

Raul

2 REPLIES
New Member

Re: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Fa

Hi Raul,

I have seen similar issues on Cisco 6500 series chassis'. I have had to replace the chassis itself and from the symptoms you are describing it seems you are also experiencing the same problem.

Fabric channel errors occur when there is a issue with a slot communicating with the supervisor(s). I would recommend replacing the chassis.

Regards

Sent from Cisco Technical Support iPad App

New Member

Re: %C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Fa

I'm having the *exact same problem.  Three different types of cards (WS-X6748-GE-TX, WS-X6716-10GE,

WS-X6724-SFP) won't boot in slot 4 due to "Fabric channel errors", but those same cards work in other slots.

We've tried a different SUP in the chassis, and a different chassis!!

I have a TAC case open and will update on progress.

%C6KPWR-SP-4-DISABLED: power to module in slot 4 set off (Fabric channel errors)

6500#sh mod

Mod Ports Card Type                              Model              Serial No.

--- ----- -------------------------------------- ------------------ -----------

  3   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX   

  4   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP     

  5    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL   

  8   16  CEF720 16 port 10GE                    WS-X6716-10GE    

Mod MAC addresses                       Hw    Fw           Sw           Status

--- ---------------------------------- ------ ------------ ------------ -------

  3  001e.4a69.d95c to 001e.4a69.d98b   2.7   12.2(14r)S5  12.2(33)SXJ3 Ok

  4  0011.9339.51b0 to 0011.9339.51c7   2.1   12.2(14r)S5  12.2(33)SXJ3 PwrDown

  5  0013.7f0a.e42c to 0013.7f0a.e42f   4.5   8.5(2)       12.2(33)SXJ3 Ok

  8  0007.7d38.5ee8 to 0007.7d38.5ef7   1.0   12.2(18r)S1  12.2(33)SXJ3 Ok

Mod  Sub-Module                  Model              Serial       Hw     Status

---- --------------------------- ------------------ ----------- ------- -------

  3  Distributed Forwarding Card WS-F6700-DFC3BXL    5.3    Ok

  4  Distributed Forwarding Card WS-F6700-DFC3BXL    5.3    PwrDown

  5  Policy Feature Card 3       WS-F6K-PFC3BXL      1.8    Ok

  5  MSFC3 Daughterboard         WS-SUP720           2.7    Ok

  8  Distributed Forwarding Card WS-F6700-DFC3C      1.4    Ok

Mod  Online Diag Status

---- -------------------

  3  Pass

  4  Not Applicable

  5  Pass

  8  Pass

6500#

2084
Views
0
Helpful
2
Replies
CreatePlease login to create content