12-25-2008 04:17 AM - edited 03-04-2019 03:14 AM
Hi,
I'm hoping someone will be able to help me with a solution to my problem.
I have a CISCO 2811 running IOS 12.4 and 4 ADSL lines unfortunately not bonded so have seperate public IP addresses.
thae traffic is pretty much balanced over all 4 lines.
The problem is i can't to connecting to Internet.
Anyone got any bright ideas?
12-26-2008 01:19 AM
need a route map for your NAT
12-26-2008 03:10 AM
Hi,
Please correct all ip nat inside source statements or NAT overload to match traffic based on route-maps.
eg:
ip nat inside source route-map INTERNET1 interface Dialer1 overload
Also add the default route-statement pointing to appropriate dialer interfaces or next-hops associated with that dialer interface such as
ip route 0.0.0.0 0.0.0.0 [dialer interface or next-hop IP] .
Consider reading the following paper as well, to remove inactive routes based on tracking.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml
HTH
Lejoe
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: