Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Can 1841 use as CE and run ip multicast?

I used this configure:

ip multicast-routing

ip pim rp-address 192.168.10.1

interface FastEthernet0/0

description link to Patong

ip address 172.20.246.46 255.255.255.252

ip pim sparse-mode

load-interval 30

duplex auto

speed auto

!

interface FastEthernet0/1

description link LAN Decode

ip address 192.168.101.1 255.255.255.0

ip pim sparse-mode

ip igmp static-group 239.70.10.10

load-interval 30

duplex auto

speed auto

I found it high cpu.

Router#sho proc cpu sor 5se

CPU utilization for five seconds: 86%/37%; one minute: 86%; five minutes: 86%

PID Runtime(ms)   Invoked     uSecs   5Sec   1Min   5Min TTY Process

80   36487776 148941564       244 47.91% 48.07% 48.15%   0 IP Input        

   4       67672     8757       7727 0.39% 0.08% 0.06%   0 Check heaps    

How should I do

Everyone's tags (5)
1 REPLY
New Member

Can 1841 use as CE and run ip multicast?

You May have to increase DRAM ..

267
Views
0
Helpful
1
Replies
CreatePlease login to create content