Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Can a Catalyst 3845 support two DS3 cards?

I have a ATM DS3 card in one slot and have two empty slots. Can I install another ATM or serial DS3 card with no conflict?

Thanks,

Marc

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions

Re: Can a Catalyst 3845 support two DS3 cards?

Yes, refer to table 3 on this document-

http://cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a008010fba2.html

I also ran it through the configurator just to make sure. You will need the SP Services IOS for the NM-1A-T3.

HTH and please rate.

1 REPLY

Re: Can a Catalyst 3845 support two DS3 cards?

Yes, refer to table 3 on this document-

http://cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a008010fba2.html

I also ran it through the configurator just to make sure. You will need the SP Services IOS for the NM-1A-T3.

HTH and please rate.

301
Views
0
Helpful
1
Replies
This widget could not be displayed.