I think you wrongly mentioned the two interfaces as same as s0
If you have two default route via two interfaces s0 and s1 , and both of them having unequal subscibed bandwidth from ISP's , by default will have per destination load balancing .And the 512 K link would be full and the destinations via 512k link will have problems.
You can do a per-packet load balancing , if load-sharing per-packet is mentioned in both the interfaces .
As per your question , Cef cannot do unequal loadbalancing .
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...