Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can Cisco Router support multiple PPPoE connection?

Dear all,

Can Cisco Router support multiple PPPoE connection?

If yes, can it also support load-sharing for outgoing support to different PPPoE connection?

Thanks,

Eric

4 REPLIES
Bronze

Re: Can Cisco Router support multiple PPPoE connection?

I think you can , but i didn't use it

You can try from SDM create another Dialer and try binding to one other physical interface .

For load balancing you can refer the below doc.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Regards

Haris

Hall of Fame Super Silver

Re: Can Cisco Router support multiple PPPoE connection?

Hello Eric,

in 12.4T support for multiple PPPoE clients over the same ATM/ADSL interface has been introduced

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t15/mpppoec.html

if instead you want to use multiple DSL lines you can follow the suggestions of the previous post: you define a dialer interface for each DSL interface.

The more difficult part can be NAT configuration.

Routing redundancy is as simple as adding a second defaul static route

Hope to help

Giuseppe

New Member

Re: Can Cisco Router support multiple PPPoE connection?

Thanks for your prompt reply. It is very helpful.

Besides, do you know if Cisco ASA also have such features?

Thanks,

Eric

Hall of Fame Super Silver

Re: Can Cisco Router support multiple PPPoE connection?

Hello Eric,

I don't think ASA supports the PPPoE client feature, it can support multiple default routes out the same interface

see

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/ip.html

Hope to help

Giuseppe

1193
Views
0
Helpful
4
Replies