Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can I take a Cisco 851w and create a DMZ Host?

I have not been able to figure out how to make this possible.

3 REPLIES
Hall of Fame Super Gold

Re: Can I take a Cisco 851w and create a DMZ Host?

Hi, you cannot create a real DMZ lan as the 851 does not supports more than 1 VLAN.

However with the "ip nat source inside" commands you can forward port ranges to a PC, that often is sane things as "DMZ host".

Hope this helps, please rate post if it does!

New Member

Re: Can I take a Cisco 851w and create a DMZ Host?

excuse my ignorance, but I thought you could only do single ports with that command. Do yo have a short config example by chance?

Thanks in advance.

New Member

Re: Can I take a Cisco 851w and create a DMZ Host?

Got it below~

ip nat pool p2p 192.168.1.10 192.168.1.10 netmask 255.255.255.0 type rotary

ip nat inside destination list 100 pool p2p

access-list 100 permit tcp any any range 6881 6999

Thanks for getting me on the right track!

Shane C.

144
Views
0
Helpful
3
Replies
CreatePlease login to create content