Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can I use different local AS# for each VRF?

How can I use different local AS# for each VRF as we are trying to convert a Juniper MPLS network to use Cisco but their current Juniper routers has different local AS# per VRF and don't know if we can do that for IOS?

Example:

router bgp 2

bgp log-neighbor-changes

no auto-summary

!

address-family ipv4 vrf VPN1

neighbor 1.1.1.1 remote-as 3

....

Can't find a command to specify the local AS# under "address-family ipv4 vrf VPN1"?

3 REPLIES
New Member

Re: Can I use different local AS# for each VRF?

Never mind... Found the answer and I will use the local-as when peering with the PE routers.

New Member

Re: Can I use different local AS# for each VRF?

The local-as can only be used for EBGP peering but not IBGP.

Does anyone know how I can do the samething for IBGP peering?

New Member

Re: Can I use different local AS# for each VRF?

Hello,

I think you can only use eBGP in an address-family.

210
Views
0
Helpful
3
Replies