can not access webserver from inside lan however accessible from outside
after installing cisco 1811w nat and pat is working fine from outside and inside just one thing is not working i can not access our webserver through FQN i can access it by the private ip only. it is also solved by modyfing the host file but this does not make any sens as i have to do this on all pcs...what is on the router that preventing the name reslove or what is going on.thanks
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...