I am not able to read the attachment and so do not know if it had information that was helpful. I think that the question from Reza is an excellent starting point and relates to the question from NT about how they are connected. If the PC to router connection is not correctly set up (crossover cable if directly connected) then the router interfaces should be protocol down, and that would explain why the PCs do not ping the gateway.
In addition to those good questions I would ask if you can check and confirm how the PCs are configured? Do they have the correct gateway address configured?
i remembered checking out one of the lab exercises in CCNA exploration. the weird thing about it is that the PC to router cable connection uses cross cable (one with - - -). try mixing between straight and cross cable connection until you see green light blinking. i'm sure one of them will work.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.