02-24-2009 10:07 AM - edited 03-04-2019 03:42 AM
Craziest thing. I have a router at a remote office and I can not telnet to either active port. I can ping it, it is passing traffic, I can telnet to devices on the other side of it. Here is the config, I would appreciate any ideas or trouble shooting suggestions.
02-24-2009 10:46 AM
Were you ever able to telnet into it?
Has the router rebooted recently?
How recent are the configurations you provided?
02-24-2009 11:12 AM
the config is a few weeks old. I was able to telnet it until a couple of weeks ago. the router was re-started this weekend.
02-24-2009 11:21 AM
maybe do a port scan so see if port 22 is open on it.
02-24-2009 11:25 AM
Maybe the following was not saved and the router lost when it was rebooted:
line vty 0 4
password xxxxxxxx
login
03-11-2009 06:51 AM
Well, after working with TAC we fixed the problem. I just don't understand why it fixed it. We turned off "ip classless". When I entered the command "no ip classless" Telnet then began working. Really strange but it fixed the problem.
03-11-2009 01:17 PM
Glad to hear that it's working.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: