I have looked at the information in the attachment. I do not yet see what is causing the problem. I see one of the messages in the log is:
Oct 14 13:41:44.059: Se1/0:0 PPP: Authorization required
but I do not see anything in the config that relates to authorization.
There are two things that occur to me that might need to be checked out:
- it may be that the authorization issue is caused by whatever is calling this router. Do you know what that device is and do you have access to its configuration?
- I note that the configuration information that you posted is from show configuration. This command looks to the stored (backup) config in NVRAM and not the active running config. Is it possible that some change was made in the active configuration that we are not seeing?
It might be helpful if you would run debug ppp negotiation and post the output when there is an attempt to call. This might help us understand what is causing the authorization issue.
I tend to agree with Rick's post. The culprit is likely an external client that is forcing an authentication method that is not configured on the router. This is classic for an MS dialup or VPN config (particularly on govt networks) to force MS CHAP or MS CHAP VII or no authetication at all. From the router perspective, it looks like an unsupportable negotiation in PPP. As Rick said, "debug ppp neg" should yield the likely protocol requested.
Rick, say hi to all the guys at Chesapeake; they are the best. All is well here. Paul
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.