But I can't get the phones to register with CME. The phones get an IP address, they grab the config files, get assigned an extension number, but I can't make any calls between the phones. Can someone please suggest what trouble shooting steps I can take to see what is going wrong?
Here is the config,
! voice register global mode cme source-address 126.96.36.199 port 5060 max-dn 100 max-pool 24 load 7960-7940 P0S3-07-5-00 tftp-path tftp://188.8.131.52 file text create profile sync 0002872765459579 ! voice register dn 1 number 211 ! voice register dn 2 number 212 ! voice register dn 3 number 515 after-hour exempt name Jose label phone3 ! voice register dn 17 number 7001 ! voice register pool 1 id mac 000D.28F3.544D type 7940 number 1 dn 17 codec g711ulaw ! voice register pool 2 id mac 000C.CEBD.D1F8 type 7940 number 1 dn 2 codec g711ulaw ! voice register pool 3 id mac 0015.6338.420A type 7940 number 1 dn 3 codec g711ulaw
1760cme#sho voice register all VOICE REGISTER GLOBAL ===================== CONFIG [Version=4.1(0)] ======================== Version 4.1(0) Mode is cme Max-pool is 24 Max-dn is 100 Source-address is 184.108.40.206 port 5060 Load 7960-40 is P0S3-07-5-00 Time-format is 12 Date-format is M/D/Y Time-zone is 5 Hold-alert is disabled Mwi stutter is disabled Mwi registration for full E.164 is disabled Forwarding local is enabled Dst auto adjust is enabled start at Apr week 1 day Sun time 02:00 stop at Oct week 8 day Sun time 02:00 Max redirect number is 5 Telnet Level: 0 Tftp path is tftp://220.127.116.11 Generate text file is enabled Tftp files are created, current syncinfo 0002872765459579 OS79XX.TXT is created. timeout interdigit 10 network-locale US (This is the default network locale for this box) network-locale US network-locale US network-locale US network-locale US user-locale US (This is the default user locale for this box) user-locale US user-locale US user-locale US user-locale US
VOICE REGISTER DN ================= Dn Tag 1 Config: Number is 211 Preference is 0 Huntstop is disabled Auto answer is disabled Dn Tag 2 Config: Number is 212 Preference is 0 Huntstop is disabled Auto answer is disabled Dn Tag 3 Config: Number is 515 Preference is 0 Huntstop is disabled Name Jose Auto answer is disabled Label is phone3 after-hour exempt Dn Tag 17 Config: Number is 7001 Preference is 0 Huntstop is disabled Auto answer is disabled
VOICE REGISTER TEMPLATE =======================
VOICE REGISTER DIALPLAN =======================
VOICE REGISTER POOL =================== Pool Tag 1 Config: Mac address is 000D.28F3.544D Type is 7940 Number list 1 : DN 17 Proxy Ip address is 0.0.0.0 DTMF Relay is disabled Call Waiting is enabled DnD is disabled keep-conference is enabled service-control mechanism is not supported
Pool Tag 2 Config: Mac address is 000C.CEBD.D1F8 Type is 7940 Number list 1 : DN 2 Proxy Ip address is 0.0.0.0 DTMF Relay is disabled Call Waiting is enabled DnD is disabled keep-conference is enabled service-control mechanism is not supported registration Call ID is email@example.com active primary line is: 212
Pool Tag 3 Config: Mac address is 0015.6338.420A Type is 7940 Number list 1 : DN 3 Proxy Ip address is 0.0.0.0 DTMF Relay is disabled Call Waiting is enabled DnD is disabled keep-conference is enabled service-control mechanism is not supported
I was afraid you were going to say this. But I want to learn how to implement both SIP and SCCP. Can you suggest how to find out why the phones are not registering? Is there a good debug command to use for this?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...