Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't ping routers across point-to-point frame-relay

'evening,

 

  Really basic setup.  Designed with Packet Tracer, trying to ping routers across a point-to-point frame-relay.  I've designed this according to three different training sources who all say the same thing.  Yet, all pings failed.

 

The shows:

 

R1

R1#copy run st

Destination filename [startup-config]? 
Building configuration...
[OK]
R1#show run
Building configuration...

Current configuration : 883 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
no ip domain-lookup
!
interface FastEthernet0/0
 no ip address
 duplex auto
 speed auto
 shutdown
!
interface FastEthernet0/1
 no ip address
 duplex auto
 speed auto
 shutdown
!
interface Serial1/0
 no ip address
 encapsulation frame-relay
!
interface Serial1/0.12 point-to-point
 ip address 192.168.12.1 255.255.255.0
 frame-relay interface-dlci 102
!
interface Serial1/0.13 point-to-point
 ip address 192.168.13.1 255.255.255.0
 frame-relay interface-dlci 103
!
ip classless
!
end


R1#show frame-relay lmi
LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 638       Num Status msgs Rcvd 638
 Num Update Status Rcvd 0       Num Status Timeouts 16
 
LMI Statistics for interface Serial1/0.12 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 0         Num Status msgs Rcvd 0
 Num Update Status Rcvd 0       Num Status Timeouts 16
 
LMI Statistics for interface Serial1/0.13 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 0         Num Status msgs Rcvd 0
 Num Update Status Rcvd 0       Num Status Timeouts 16
 
R1#show frame-relay map
Serial1/0.12 (up): point-to-point dlci, dlci 102, broadcast, status defined, active
Serial1/0.13 (up): point-to-point dlci, dlci 103, broadcast, status defined, active

R1#show frame-relay pvc

PVC Statistics for interface Serial1/0 (Frame Relay DCE)
DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.12

input pkts 14055       output pkts 32795        in bytes 1096228
out bytes 6216155      dropped pkts 0           in FECN pkts 0
in BECN pkts 0         out FECN pkts 0          out BECN pkts 0
in DE pkts 0           out DE pkts 0
out bcast pkts 32795   out bcast bytes 6216155

DLCI = 103, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.13

input pkts 14055       output pkts 32795        in bytes 1096228
out bytes 6216155      dropped pkts 0           in FECN pkts 0
in BECN pkts 0         out FECN pkts 0          out BECN pkts 0
in DE pkts 0           out DE pkts 0
out bcast pkts 32795   out bcast bytes 6216155

 

R2

 

R2#SHOW RUN
Building configuration...

Current configuration : 772 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R2
!
no ip domain-lookup
!
interface Serial1/0
 no ip address
 encapsulation frame-relay
!
interface Serial1/0.12 point-to-point
 ip address 192.168.12.2 255.255.255.0
 frame-relay interface-dlci 201
!
ip classless
!
end


R2#show fr map
Serial1/0.12 (up): point-to-point dlci, dlci 201, broadcast, status defined, active


R2#show fr pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)
DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.12

input pkts 14055       output pkts 32795        in bytes 1096228
out bytes 6216155      dropped pkts 0           in FECN pkts 0
in BECN pkts 0         out FECN pkts 0          out BECN pkts 0
in DE pkts 0           out DE pkts 0
out bcast pkts 32795   out bcast bytes 6216155

 

R2#show fr lmi
LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 679       Num Status msgs Rcvd 678
 Num Update Status Rcvd 0       Num Status Timeouts 16
 
LMI Statistics for interface Serial1/0.12 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 0         Num Status msgs Rcvd 0
 Num Update Status Rcvd 0       Num Status Timeouts 16

 

R3

 

R3#show run
Building configuration...

Current configuration : 772 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R3
!
interface Serial1/0
 no ip address
 encapsulation frame-relay
!
interface Serial1/0.13 point-to-point
 ip address 192.168.13.2 255.255.255.0
 frame-relay interface-dlci 301
!
ip classless
!
end


R3#show fr map
Serial1/0.13 (up): point-to-point dlci, dlci 301, broadcast, status defined, active


R3#show fr lmi
LMI Statistics for interface Serial1/0 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 703       Num Status msgs Rcvd 702
 Num Update Status Rcvd 0       Num Status Timeouts 16
 
LMI Statistics for interface Serial1/0.13 (Frame Relay DTE) LMI TYPE = CISCO
 Invalid Unnumbered info 0      Invalid Prot Disc 0
 Invalid dummy Call Ref 0       Invalid Msg Type 0
 Invalid Status Message 0       Invalid Lock Shift 0
 Invalid Information ID 0       Invalid Report IE Len 0
 Invalid Report Request 0       Invalid Keep IE Len 0
 Num Status Enq. Sent 0         Num Status msgs Rcvd 0
 Num Update Status Rcvd 0       Num Status Timeouts 16
 
R3#show fr pvc

PVC Statistics for interface Serial1/0 (Frame Relay DTE)
DLCI = 301, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial1/0.13

input pkts 14055       output pkts 32795        in bytes 1096228
out bytes 6216155      dropped pkts 0           in FECN pkts 0
in BECN pkts 0         out FECN pkts 0          out BECN pkts 0
in DE pkts 0           out DE pkts 0
out bcast pkts 32795   out bcast bytes 6216155

 

  Any input would really be appreciated.

 

Thanks

246
Views
0
Helpful
0
Replies
CreatePlease login to create content