Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Can the 827 act as an Ethernet Router?

My example:

I have a SHDSL connection and have a Cisco 828 configured to bridge and behind that I have an ethernet router - something like a Netscreen Firewall which holds the WAN IP address.

What I want to do is replace the Netscreen firewall with a Cisco 827 so the 827 just becomes an ethernet router.

Cisco 828 (set to bridge) <- Cisco 827 (ethernet router) <- LAN

If this is possible, does anyone have any config for the 827 to act as an ethernet router in this fashion?

Thanks.

2 REPLIES

Re: Can the 827 act as an Ethernet Router?

Hi

Are you talking about Cisc 827V ?? it contains 4 Analog Telephone ports and a 10Mbps ethernet port.

do revert back if thts the provisioning in your scenario too ,if that happens to be there in place at your side i dont think you will be able to interface (connect) or make your router as a ethernet router to connect the lan to other Cisc 828 router..

regds

New Member

Re: Can the 827 act as an Ethernet Router?

Hi,

If I understand correctly you set up. You will need a router with 2 Ethernet ports. 1 connect to the bridge and 1 to the LAN.

C827 has only 1 Ethernet port.

Regards,

cisand

106
Views
0
Helpful
2
Replies
CreatePlease to create content