Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cannot delete an channel group from STM-1 port adapter configuration

Hi,

Please see this configuration:

controller SONET 1/0

au-4 1 tug-3 2

  tug-2 2 e1 3 channel-group 0 timeslots 1

  tug-2 2 e1 3 channel-group 1 timeslots 2

  tug-2 2 e1 3 channel-group 2 timeslots 3

  tug-2 2 e1 3 channel-group 3 timeslots 4

  tug-2 2 e1 3 channel-group 4 timeslots 5

end

When I type for example " no tug-2 2 e1 3 channel-group 2 timeslots 3 " the router accepts the command but

tug-2 2 e1 3 channel-group 2 timeslots 3 is still in configuration file. The router is 7206VXR with following software:

Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.4(4)T1

STM-1 port adapter:PA-MC-STM-1SMI

Does anyone have any idea why this command is not executed?

Thanks,

1 REPLY
Hall of Fame Super Gold

Cannot delete an channel group from STM-1 port adapter configura

Normally these are bugs, you can try updating IOS.

141
Views
0
Helpful
1
Replies