01-23-2014 06:35 AM - edited 03-04-2019 10:09 PM
Hi,
this 877 is configured like this:
Current configuration : 1953 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Vitamine-ADSL-VoIP
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$aWuV$JUjVoy./Y2XTl.Hv9ZJwh/
!
no aaa new-model
!
!
dot11 syslog
ip cef
!
!
ip name-server 213.144.235.1
ip name-server 213.144.235.2
!
!
!
username admin privilege 15 secret 5 $1$y/XI$FkVttFvlDNwaloHpIr6Vu/
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 0/33
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
ip address 192.168.100.253 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer1
mtu 1492
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username kpfgfd2841mc0 password 7 115E404455428402152212F19
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
!
no ip http server
no ip http secure-server
ip dns server
ip nat inside source list 101 interface Dialer1 overload
!
access-list 23 remark acl_remote_management
access-list 23 permit 95.142.48.239
access-list 23 permit 84.246.5.4
access-list 23 remark acl_remote_management_routit
access-list 23 permit 84.246.25.0 0.0.0.255
access-list 23 permit 172.31.255.0 0.0.0.255
access-list 23 permit 212.121.121.0 0.0.0.255
access-list 101 permit ip 192.168.100.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!
!
control-plane
!
!
line con 0
no modem enable
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
!
scheduler max-task-time 5000
end
So, when i try to connect with my laptop with ip 192.168.100.100 it says connection refused!
Hope someone can help :-)
Solved! Go to Solution.
01-23-2014 06:40 AM
The issue is that your vty are configured to use access list 23 to control remote access. And access list 23 does not permit 192.168.100.100. Add a permit in access list 23 or remove access-class from the vty and then your SSH could work.
HTH
Rick
01-23-2014 06:40 AM
The issue is that your vty are configured to use access list 23 to control remote access. And access list 23 does not permit 192.168.100.100. Add a permit in access list 23 or remove access-class from the vty and then your SSH could work.
HTH
Rick
01-23-2014 06:52 AM
Thanks, first i needed tot create a rsa key for ssh version 2.0
01-23-2014 07:08 AM
Yes I had wondered if the RSA key might be an issue. But clearly the primary problem was the access list 23. I am glad that my suggestion was helpful in getting your problem solved. Thank you for using the rating system to mark this question as answered.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide