Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Cannot telnet into the device .

i have Cat OS switch, after loggin thru console i did show user , all the 9 vty session were occupied. i tried to disconnect the line but cud not. is there any other way where i can clear the telnet session and get access to the device thru telnet ?

4 REPLIES

Re: Cannot telnet into the device .

Hi,

If you have any snmp server configured in your router for collecting the traps or any other info , then you can clear it

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a00801d6e07.shtml#clear_vty

Hope this helps

regards

vanesh k

New Member

Re: Cannot telnet into the device .

Vanesh, it is not a terminal Server .

New Member

Re: Cannot telnet into the device .

You could possibly try modifying the timeout value for the vty lines.

SD

New Member

Re: Cannot telnet into the device .

Try this

router# who

line user host idle location

98 vty 0 test idle 5w3d 10.10.10.1

router# sho tcp brief

TCB Local Address Foreign Address (state)

664B37C 10.10.10.1.22 10.10.10.2.22 ESTAB

router# clear tcp TCB 664B37C

(confirm)

router# return

130
Views
0
Helpful
4
Replies