Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot use Class map policy on atm interface

( Ocultar detalles )

Tarea personal8/02/12

Notas:

Dear friends

can anyone help with this issue

i´ve tried to configure class map policy on a atm interface, as follow:

class-map match-all 256K-Monitoreo

match access-group 101

!

!

policy-map Restricion

class 256K-Monitor

bandwidth 256000

And then on a subinterface:

interface ATM0/1/0.1 point-to-point

bandwidth 512

ip address 10.130.128.235 255.255.255.248

no ip proxy-arp

ip accounting output-packets

ip virtual-reassembly

ip ospf network non-broadcast

ip ospf mtu-ignore

atm route-bridged ip

bridge-group 1

pvc 0/46

protocol ip 10.130.128.234 broadcast

encapsulation aal5snap

service-policy output Restricion

The problem is when i do a show running command the line service-policy output Restricion does not appear. When i introduce the command it doesn´t give any error.

Hope some ideas to rosolve this

Thanks

Carlos

2 REPLIES

Cannot use Class map policy on atm interface

Hello Carlos,

What is the model of cisco box you have? Also provide me the IOS version.

Thanks

Vivek

New Member

Cannot use Class map policy on atm interface

Hi Vivek!!

Here is the info you ask for:

Cisco 2811

System image file is "flash:c2800nm-advsecurityk9-mz.124-15.T10.bin

Thank you for your help

Carlos G.

194
Views
0
Helpful
2
Replies