Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

cant configure 877w router to get to the internet

I use the sdm manager and im not to sure what to put in the Wan interface gui. Im basicly looking at my linksys router to find my dns server my my ip from roadrunner but im i missing something. cant connect to the internet..any help would be great........

John

5 REPLIES
Bronze

Re: cant configure 877w router to get to the internet

RR should use DHCP so you should just be able to pull that from them. Unless you specifically ask for a static IP.

If I remember correctly, you'll also need to specify an ip route to use.

ip route 0.0.0.0 255.255.255.255 (outsideinterface)

Something like that.

New Member

Re: cant configure 877w router to get to the internet

Do i put ip route in cli.

How would i put this in on smd interface .

Do i need to add dns server when it asks me?

do just leave the ip blank when it ask me in sdm management? Just a little frustrated.....

Bronze

Re: cant configure 877w router to get to the internet

Oh, yeah. . .in global config, ip route 0.0.0.0 255.255.255.255 dhcp (I think you can also use the interface name, but I could be wrong).

For SDM, I'm not sure as I really don't touch graphical config tools. I would think you don't need to input an IP, just put dhcp if you're using DHCP, I believe.

New Member

Re: cant configure 877w router to get to the internet

Do you have access to sdm ? if you do take a

look at it and see what you thing. I will try what you suggested. Thanks

John

Bronze

Re: cant configure 877w router to get to the internet

Nope. I blew SDM off my router and tossed the discs. I found that generally, in the amount of time it took some of my co-workers at my old job to configure a router with SDM, I already had it done via the CLI.

104
Views
0
Helpful
5
Replies
CreatePlease to create content