i have a brand new 2911 Security Bundle router, so i wanted to replace the Small 1700 seriers router, i removed the WIC-1T Card from the small 1700 Series router and inserted itr in EHWIC Slot 0 on my 2911 router.
unfiortunately i didnt see the interface when i executed the "show interfaces command"
and saw :
after isuaing "show diag"
WIC Slot 1: Serial 1T WAN daughter card WIC module not supported/disabled in this slot Hardware revision 1.0 Board revision J0 Serial number 28152071 Part number 800-01514-01 FRU Part Number WIC-1T= Test history 0x0 RMA number
what must i do? is the WIC-1T uncompatible with 2911?
Enhanced High-Speed WAN Interface Cards Enhanced High-Speed WAN Interface Card (EHWICs) are the latest generation of interface cards. EHWICs are installed in the EHWIC slot on the router. Legacy interface cards, such as WAN interface cards (WICs), voice interface cards (VICs), high-speed WAN interface cards (HWICs), double-width high-speed WAN interface cards (DHWICs), and (EHWICs) are supported in the EHWIC slot on the router. Services Performance Engine 200 and Services Performance Engine 250 support the following legacy interface cards in the EHWIC slots. (See Table 1-7.) Table 1-7 Slot 0 Slot 1 Slot 2 WIC/VIC and HWIC WIC/VIC, HWIC, EHWIC, DHWIC, and EDHWIC WIC/VIC and HWIC
isnt that the WIC is representing WIC-1T cards as well? if there is no slot on this thing then im dissapointed coz i have to sell it Bonnie
We are pleased to announce availability of Beta software for 16.6.3. 16.6.3 will be the second rebuild on the 16.6 release train targeted towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are looking for early feedback from custome...