%IPCOIR-3-LCCRASH: The card in slot x/y has crashed. Cause Register: 0x0, Signal: 0
%IPCOIR-3-CARDCRASH: Card crashed in slot x/y
Can someone hwlp me what these messahes are,, and card crashed and came back up by itseld and when i decoded those error messages ,, it say that The IPC message is reporting that a wrong version is received from an operational card.
please help me what are these messages and what shld i do when i receive them and how to avoid them
Thnx for replying me but there is no crash info and no traces of crash info files in the bootflash and i saw those links and they meant nothing,, contact cisco TAC,, thats all.. and another message sai that incorrect software version has been received from an operational card. what does this mean,,, canu help me more,,
thnx what is the wrkaround for this ,, and what exactly does these messages mean
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...