Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat 4500 QoS policing user edge traffic

I dont want to trust DSCP values from user/phones and instead want to apply a service-policy to classify and police traffic to 128K voice, 32K signalling, and so on. To do this is easy enough, something like:

policy-map User-Edge-Policy

class VVLAN-VoIPTel

set ip dscp ef

police 128000 8000 exceed-action drop

class DVLAN-VoIPTel

set ip dscp ef

police 128000 8000 exceed-action drop

class VVLAN-RealTimeInt

set ip dscp cs4

police 5000000 8000 exceed-action drop

But as you can see I also want to classify and police video. As the video is also a UDP/RTP port stream like voice, how can I differentiate it?

I have tried an extended ACL that matches on already set DSCP values, but that seems to work only on a 3750, e.g:

permit udp 172.16.0.0 0.0.255.255 any range 16384 32767 dscp ef

But this didnt seem to work on the 4500, as I dont think it can see the DSCP markings (different order of operation I think). So any alternatives for the 4500?

222
Views
0
Helpful
0
Replies