09-28-2013 10:20 PM - edited 03-04-2019 09:10 PM
Hi,
I have problem in Catalyst 2900 switch every 2days it's stop working and only sys led ON stable, also all switch port led went off no connectivity between core switch.i have to do manually power off and power on again to make it working.Any help on this problem would be greatly appreciated!
09-28-2013 11:17 PM
Since you reloaded the switch then there is no logs we can get from it, i believe you should try loading a different ios and monitor, if the issue persists then replace it,
Sent from Cisco Technical Support iPhone App
09-28-2013 11:25 PM
can you help me to upgrade to new version because i never did upgrade before. it running currently this version
Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5, RELEA
SE SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 20:06 by nachen
Image text-base: 0x00003000, data-base: 0x00D40000
Switch uptime is 0 weeks, 0 days, 1 hours, 33 minutes
System returned to ROM by power-on
System image file is "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.
SE5.bin"
09-29-2013 12:25 AM
Hi,
I' recommend to use version 12.2(55)SE8.
You can find the instructions how to update in the relaese-notes:
HTH
Rolf
09-29-2013 02:09 AM
I' recommend to use version 12.2(55)SE8.
2960 running only on Layer 2 (no default routing), 15.0(2)SE4 is also good.
12.2(55)SE8 would also be an alternative but I too would recommend.
09-29-2013 02:18 AM
2960 running only on Layer 2 (no default routing), 15.0(2)SE4 is also good.
Good to know, thanks Leo!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide