Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Catalyst 2900 stop work

Hi,

I have problem in  Catalyst 2900 switch every 2days it's stop working and only sys led ON stable, also all switch port led went off no connectivity between core switch.i have to do manually power off and power on again to make it working.Any help on this problem would be greatly appreciated!


5 REPLIES
New Member

Re: Catalyst 2900 stop work

Since you reloaded the switch then there is no logs we can get from it, i believe you should try loading a different ios and monitor, if the issue persists then replace it,

Sent from Cisco Technical Support iPhone App

New Member

Catalyst 2900 stop work

can you help me to upgrade to new version because i never did upgrade before. it running currently this version

Cisco IOS Software, C2960 Software (C2960-LANBASE-M), Version 12.2(35)SE5, RELEA

SE SOFTWARE (fc1)

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Thu 19-Jul-07 20:06 by nachen

Image text-base: 0x00003000, data-base: 0x00D40000

Switch uptime is 0 weeks, 0 days, 1 hours, 33 minutes

System returned to ROM by power-on

System image file is "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.

SE5.bin"

Re: Catalyst 2900 stop work

Hi,

I' recommend to use version 12.2(55)SE8.

You can find the instructions how to update in the relaese-notes:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_35_se/release/notes/OL11481.html#wp559616

HTH

Rolf

Hall of Fame Super Gold

Catalyst 2900 stop work

I' recommend to use version 12.2(55)SE8.

2960 running only on Layer 2 (no default routing), 15.0(2)SE4 is also good.

12.2(55)SE8 would also be an alternative but I too would recommend.

Catalyst 2900 stop work

 2960 running only on Layer 2 (no default routing), 15.0(2)SE4 is also good.

Good to know, thanks Leo!

1278
Views
4
Helpful
5
Replies
CreatePlease to create content