Apply the smart port role as "server" which will apply this role to ports that will be connected to servers that provide network services, such as exchange servers, collaborative servers, terminal servers, file servers, Dynamic Host Configuration Protocol (DHCP) servers, IP PBX server, and so on.
This role is for Gigabit or non-Gigabit ports, depending on the server type to be connected. This role prioritizes server traffic as trusted, critical, business, or standard, depending on the function of the server.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...