I am administrating and ISP and now we have more than 10 different networks separated and independent one another.
My idea is to centralize all the network and become one bigger operator.
For that I'm thinking in deploying all servers and internet connection in an important data center. Then we'll do circuits until all the separated networks and we will administrate all from one big node.
My question is:
Is a must to use ospf or something like that.
Could you give me any example of that kind of network?
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...