Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

%CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie format for card!

hi

Have tried to insert a WIC-1SHDSL-V3 into a 1841(revision 5) and i get the following error

%CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie format for card!

here is a show diag

WIC/HWIC Slot 1:

Unknown WAN daughter card

WIC module not supported/disabled in this slot

Hardware Revision : 0.0

Top Assy. Part Number : 800-26571-01

Board Revision : A0

Deviation Number : 81674

Fab Version : 04

PCB Serial Number : FOC09490H0B

RMA Test History : 00

RMA Number : 0-0-0-0

RMA History : 00

Version Identifier : V02

Product (FRU) Number : WIC-1SHDSL-V3

EEPROM format version 4

EEPROM contents (hex):

0x00: 04 FF 40 04 DA 41 00 00 C0 46 03 20 00 67 CB 01

0x10: 42 41 30 88 00 01 3F 0A 02 04 C1 8B 46 4F 43 30

0x20: 39 34 39 30 48 30 42 03 00 81 00 00 00 00 04 00

0x30: 89 56 30 32 20 CB 8D 57 49 43 2D 31 53 48 44 53

0x40: 4C 2D 56 33 FF FF FF FF FF FF FF FF FF FF FF FF

0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF 4A A9

Does anyone know if this version of the card is compatible with the 1841

Thanks

Wai-Lun

1 ACCEPTED SOLUTION

Accepted Solutions

Re: %CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie forma

Hi

hope this helps ...

Error Message

%CFG-3-CARD_NOT_SUPPORTED : Slot [dec]: [chars]

Explanation The specified line card is not recognized by the system.

Recommended Action Replace the line card with a supported line card, or upgrade the software to a Cisco IOS software image that supports this card.

regds

3 REPLIES

Re: %CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie forma

Hi

hope this helps ...

Error Message

%CFG-3-CARD_NOT_SUPPORTED : Slot [dec]: [chars]

Explanation The specified line card is not recognized by the system.

Recommended Action Replace the line card with a supported line card, or upgrade the software to a Cisco IOS software image that supports this card.

regds

New Member

Re: %CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie forma

What Cisco model do you have ?

What Cisco IOS are you running ?

New Member

Re: %CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie forma

I was running c1841-ipbase-mz.124-1c and have now upgraded to c1841-ipbasek9-mz.124-5 which has fixed the problem.

Thanks for the help.

2752
Views
0
Helpful
3
Replies
CreatePlease to create content