01-13-2006 08:42 AM - edited 03-03-2019 11:27 AM
hi
Have tried to insert a WIC-1SHDSL-V3 into a 1841(revision 5) and i get the following error
%CFG-3-CARD_NOT_SUPPORTED: Slot 1: Unrecognized cookie format for card!
here is a show diag
WIC/HWIC Slot 1:
Unknown WAN daughter card
WIC module not supported/disabled in this slot
Hardware Revision : 0.0
Top Assy. Part Number : 800-26571-01
Board Revision : A0
Deviation Number : 81674
Fab Version : 04
PCB Serial Number : FOC09490H0B
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Version Identifier : V02
Product (FRU) Number : WIC-1SHDSL-V3
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 04 DA 41 00 00 C0 46 03 20 00 67 CB 01
0x10: 42 41 30 88 00 01 3F 0A 02 04 C1 8B 46 4F 43 30
0x20: 39 34 39 30 48 30 42 03 00 81 00 00 00 00 04 00
0x30: 89 56 30 32 20 CB 8D 57 49 43 2D 31 53 48 44 53
0x40: 4C 2D 56 33 FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF 4A A9
Does anyone know if this version of the card is compatible with the 1841
Thanks
Wai-Lun
Solved! Go to Solution.
01-15-2006 11:31 PM
Hi
hope this helps ...
Error Message
%CFG-3-CARD_NOT_SUPPORTED : Slot [dec]: [chars]
Explanation The specified line card is not recognized by the system.
Recommended Action Replace the line card with a supported line card, or upgrade the software to a Cisco IOS software image that supports this card.
regds
01-15-2006 11:31 PM
Hi
hope this helps ...
Error Message
%CFG-3-CARD_NOT_SUPPORTED : Slot [dec]: [chars]
Explanation The specified line card is not recognized by the system.
Recommended Action Replace the line card with a supported line card, or upgrade the software to a Cisco IOS software image that supports this card.
regds
01-16-2006 03:13 AM
What Cisco model do you have ?
What Cisco IOS are you running ?
01-16-2006 03:57 AM
I was running c1841-ipbase-mz.124-1c and have now upgraded to c1841-ipbasek9-mz.124-5 which has fixed the problem.
Thanks for the help.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: