I have a hub and spoke topology. EIGRP is changing the next hop when the routing updates comes from the hub, I do not want that to happen, what mean can i use to change the next hop of the routing update? would PBR work in thi s case? i will surely rate this post.
Simple 1 hub and 2 spoke topology. I have a GRE tunnel running between the spokes and the hub, the problem is that when i use eigrp on the tunnel the next hup shows as the hub and when i use ospf the next hop shows up as the spoke, i want eigrp to show the same behaviour. can i use policy routing?
If you can be more specific about the problem you are having or even better if you can post the configuration of all 3 routers (remove any sensitive info before posting the config) that would help us quickly identify the problem. A generalized description of the problem would mean that we would have keep asking you more info and that extends the timeline to solve the issue.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...