Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Changing AD for external EIGRP routes.

Hello guys.

 

I have two routers running both EIGRP and OSPF, i would like the EIGRP routes to be installed into the routing table rather than OSPF, but my guess is that the external EIGRP routes have a larger Administrative Distance than the OSPF routes. 

How do i change the Administrative distance of the external EIGRP routes?  am redistributing static routes.

 

regards.

1 REPLY
Bronze

Hi, Under the EIGRP process

Hi,

 

Under the EIGRP process you use the distance command, as follows:

 i.e. R1(config)# router eigrp 100

      R1 (config-router)# distance eigrp [internal AD] [external AD]

 

and just reduce the external AD, to below 110. But be careful, these values are there for a reason.

 

Very best wishes

 

Mike

 

 

148
Views
0
Helpful
1
Replies
CreatePlease login to create content